have a Witch of Stolen Souls with a non-working head? As in it is not moving and the eyes do not light up? I had that problem and was successful in fixing it. Step 1 – Remove the Head the head is simply plugged into the body with two fixed mounted plugs. Lift it...
I need this information often so I decided to make this post with all the info I need on DMX pinout Standard 3 pin XLR Standard 5 Pin XLR Not Really XLR but this is the LOR Pinout on CAT5 4 Pin 13.5mm Waterproof connectors used for DMX in my setup in...
If you need candles for decorations this simple project allows you to build candles in any size that look very real for the candle itself you can use PVC pipe. Simply cut a length of PVC pipe. I generally cut one side nice and straight (the bottom of the candle) and...
There are lots of controllers out there for lighting control and/or prop control. Here is a list of controllers, some of which we use in our setup and some that I am looking into using. Lighting Controllers Light-O-Rama AC Controller Light-O-Rama DC Controller...
After some research I decided to try the ECG-P2 controller from Joshua-1 systems. The ECG-P2 is a E1.31 to Pixel controller allowing you to control 2 banks of pixel strings. Each bank supports 4 DMX Universes of pixels which totals to 680 pixels (4 * 170 = 680px) I...
